Description
Main features:
- ALL-IN-A PLUG design – NO bulky box on the cable
- 100% in-house developed miniature SMART feature vehicle communication module inside EVSE
- Designed for 1-phase Mode 2 EV charging with currents up to 32A
- Adjustable charging current: (from 6A to 32A)
- WiFi access point with preloaded METRON Charge Control application (user can set charging power, solar surplus charging, see real time charging power & energy, house power, solar power, connect to WiFi network,…)
- OTA (over-the-air) updates (via WiFi) for Charge Control application
- Ready for wireless DYNAMIC LOAD MANAGEMENT (DLM) via additional METRON Wireless Dynamic EV Charging Unit (model 3FD-3) for protecting main house fuses, adding solar power plant power to maximize charging power/speed and “green” solar surplus charging (special Metron proprietary Dynamic Power Control System algorithms inside)
- Integrated self-resettable over-temperature protection with SOFT-OFF capability
- Built-in RCD (30mA AC + 6mA DC) with automatic self-test for maximum user safety
- PREMIUM quality EV cable used (Made in Germany)
- Selectable cable lengths from 3m to 30m
- Selectable plug type (wall socket/grid side)
- 100% all weather proof (IP67)
SPECIAL feature:
In case of using the SMART PORTABLE CHARGER(s) on 2 or more different places (e.g. you have 2 houses) it is possible to install the 3FD-3 WIRELESS DYNAMIC EV CHARGING UNITS on 2 or more different locations (e.g. 2 houses) with different main fuses and then just move/use the same SMART PORTABLE CHARGER on those different locations and have everywhere safe wireless FUSE protection DYNAMIC charging. The SMART PORTABLE CHARGER connects AUTOMATICALLY to the 3FD-3 unit at every location.
Cable properties * :
- Resistant to microbes, oil, dust and water
- Special cable design for long service life
- Flexible at low temperatures (temp. range: -25°C to 80°C)
- Withstands high mechanical stress, in particular abrasion and sliding demands
[*] Applies to the insulated cable part only, not the electronics
SIQ TEST REPORT – PREVIEW
Technical Specifications:
- Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
- Wall Plug Type (grid side): customer defined (CEE 32A (3-phase/3P N E), CEE 32A (1-phase/2P E),….)
- Max. Charging Current: 32A (single phase)
- Charging current can be adjusted by front button: 6A, 8A, 10A, 13A, 16A, 20A, 25A or 32A (no smart phone needed)
- Charging current can be adjusted by slider in Charge Control app. by 1A from 6A to 32A (smart phone needed)
- Max. Charging Power: 7.4kW
- Rated Voltage: 230V (1-phase)
- Operating voltage range: from 90V to 270V (50/60Hz)
- Idle energy consumption: 4W
- Micro EVSE – in-house developed FULL feature vehicle communication module inside
- User info via 2 blue LED lights (basic) and Charge Control app. (advanced)
- Supports OTA (over-the-air) uploads of future versions of Charge Control application firmware
- Supported WiFi standards: IEEE 802.11b/g/n
- WiFi speed: up to 150 Mbit/s
- WiFi security: WPA2
- WiFi signal range: up to 20 m
- Allows connecting the portable charging station to local WiFi network and also set the charging station internet access in the WiFi router (advanced users)
- Detects/indicates ALL normal charging states (via blue status LED)
- Detects/indicates ALL faults (via blue status LED)
- Auto recovers from any fault except ground fault
- Built-in ground fault protection device – RCD (30mA AC + 6mA DC) for maximum user safety
- Built-in automatic RCD self-test
- Built-in power contactor weld detection system
- Wall plug integrated OVER-TEMPERATURE PROTECTION (on request)
- Operating Ambient Air Temperature Range: -30 °C to 50 °C (at full sun exposure)
- Integrated self re-settable over-temperature protection with SOFT-OFF capability
- IP Rating: IP67 (100% all weather proof )
- IK rating: IK10 (impact/shock proof) + drive-over proof
- UV resistant
- Cable Color: Black or Orange
- Cable Length: customer defined
- Weight: depends on cable length
- IEC 61851 compliant
- CE approved
- Warranty: 2 years
TESLA MODEL S: depending on your on-board charger, charging with this portable charging station may be limited to 16A max
Green production
All our products are produced in a carbon neutral way by using “Sustainable energy cycle” method. Production plant where we make charging cables and portable charging stations is the first fully sustainable production facility for EV charging cables. All energy, needed for the heating and cooling of the building, production process and for transportation of goods and employees (except deliveries of heavy materials by trucks), is produced by 2 photovoltaic power plants and stored in 4 storage batteries. Almost all of the raw materials we use (cables, plugs) are produced in EU, to shorten supply routes and support local economy. Buying our products helps developing sustainable economy.
Compatibility
Beside European versions of Tesla Model S, Model X, Model Y and Model 3 electric vehicles this portable charger is also compatible with all other electric vehicles equipped with Type 2 charging sockets.
Green production
All our products are produced in a carbon neutral way by using “Sustainable energy cycle” method. Production plant where we make charging cables and portable charging stations is the first fully sustainable production facility for EV charging cables. All energy, needed for the heating and cooling of the building, production process and for transportation of goods and employees (except deliveries of heavy materials by trucks), is produced by 2 photovoltaic power plants and stored in 4 storage batteries. Almost all of the raw materials we use (cables, plugs) are produced in EU, to shorten supply routes and support local economy. Buying our products helps developing sustainable economy.
Tesla Model 3 and Model Y note:
Tesla Model 3 vehicle on-board charger is phase sequence sensitive, what means that the phases have to be in a proper sequence 1-2-3 at wall socket. If they are not, the car will not charge. To check phases and phase sequence you can use our PHASE TESTER device.
What is RCD and how does it work?
RCD is an acronym for Residual Current Device – sometimes it can be called also Earth Leakage Circuit Breaker or Safety Switch. Its purpose is to prevent you from getting a fatal electric shock if you touch live part, such as a bare copper wire under high voltage. RCDs offer a level of personal protection that ordinary fuses/circuit-breakers cannot provide. RCD constantly monitors the electric current flowing through one or more circuits which it protects. If it detects electricity flowing down an unintended path, such as through a person who has touched a live part, the RCD will switch the circuit off very quickly, significantly reducing the risk of death or serious injury.
PC04YT+ is equipped with Metron RCD Type B device called RCDB1-316CEE which represents maximum possible level of personal protection as it protects users from AC, pulsating DC, pure DC and also high frequency AC leakage currents. In order to ensure “BOXLESS” design of PC05T portable charger RCD is packed inside 3-phase 16A CEE plug itself what eliminates even the smallest unsafe section found on other portable chargers where there is at least 30cm of unprotected cable between wall plug and “bulky” in cable control box.
DISCLAIMER:
Metron® is not affiliated with or endorsed by Tesla. It is neither inferred nor implied that products sold by Metron® are authorized by or in any way connected to Tesla. All manufacturer names, symbols, and descriptions used in our images and text are used solely for identification purposes only. Tesla Model S, Model X, Model 3, Supercharger and Destination charger are trademarks of Tesla.
